This year I wanted to build some tombstones and start to replace our styrofoam ones. The styrofoam is good but they break, blow around (in high winds) and are a bit pricey compared to how long they last. So, I thought it'd be nice to build a few this year and so on over the next few years. In the meantime, we'll keep the styrofoam headstones around and blend in the new ones.Sizing/Gluing
Since I'm a builder, my 1st thought was to make them out of OSB plywood and that's what I did. I used sheets of OSB from Home Depot, ripped them down to the sizes I wanted and then glued three of the same size together with liquid nails.
I glued and clamped these together but you can screw them if you need to. A screw in each corner and a few in the middle should work fine. You just want no shifting between materials as the Flew Bond is thin and it may crack. Although it is easily fixable, we don't want cracks. If you glued them, let them sit overnight, that's what I did.
Not long ago me and the wife topped off the garden area with some bird houses. She likes having the birds around and hopefully with any luck we will get some birds.
So, I made three bird houses and mounted them on top of 4"x4" posts. Our garden area is basically hazelnut (off-white), so everything was pre-painted by us before doing this. The houses were easy to build. They just have a 1"x2" frame and then some old pickets (I picked up from a junk house in colorado springs), for the siding. I then topped them off with some copper I got from home depot. The copper does have a finish on it, so it won't patina for us but that's alright. Future houses will be raw copper I think.
There really isn't anything special here about them but birds can make them homes and they will be loaded with bird seed. Wel the two with platforms will be, the other one won't have bird seed.
My mom, Evelyn, lives in Colorado Springs and at the turn of the year they had 75mph winds that caused all kinds of trouble for fence owners and anybody with a roof. I was unaware of what was happening because I live 2 hours north but she called me and said, "I need help". I asked what was going on and she said her fence blew over. She then told me about the winds and all the details.
She asked if we could fix it and I said sure we could. What we decided though was to see if the home owners insurance would fix it. As you've probably guessed they said no and a fence builder gave her an esitmate that was for part of the fence (just the parts that blew over). I can't remember exactly his quote but I knew we could do it for cheaper than that and do the whole thing, not just parts.
I went down and took some measurements and we got started. We actually with a good clean up of the area and by removing the old fence. While most of it was down, there were some posts to remove, etc. Next, we rented an auger and drilled some holes and set our posts in concret. Then the rails went up, followed by all the pickets. We also built two gates for easier yard access. Other than losing 4 days to weather, we had things wrapped up in less than 10 days.
So, I had great luck with my other bone (for my 1st one). I thought I'd make another one. I decided to change the theme of it. Last time it was more or less a "been the woods, decomposing for awhile" bone. This time I thought I'd a "just been removed bone". Something that still has tendons/muscle attached.
My supply list has changed as my process has changed. When I was doing the last one, I was making a mental list on what I could use that would be better/easier to work with.
Before I used saran wrap for my texture layer. The problem is that it wasn't stretchy and didn't shirnk enough in the right places. So, this time I used furniture/packing shrink wrap. What I liked about it was that it stretched around my bone a lot better than the saran wrap. It also shrank better/faster.
Hello, this is my Human Bone Tutorial.
Before I begin, I watched a few different tutorials online to get a basic idea of how to do this. I only needed a basic idea because this kind of thing is really driven by imagination.Here is a list of the needed supplies: 01: PVC pipe (any length will do, I used a scrap piece that is about 15" long) 02: 90° PVC pipe (optional) 03: Saran Wrap (any brand) 04: Foil (any brand) 05: Paints (browns, yellows, reds etc) 06: Stain (browns, blacks)
I picked up an antique 1940's (according to the lady) bed frame. I saw it on-line advertised in an estate sale. What I liked is that it was cheap, I think I paid about $75 for it and great lines. The height was also an eye grabber for me. After seeing it in person I immediately thought about making it into a bench as I had never done a bed frame to bench conversion. The only issue with this is that the buyer may need a larger entryway, as this thing is pretty tall.
So, first things first, I'll strip this thing down and then sand it down. Since, I am probably painting it so I won't strip it all the way down to bare wood, although that'd be the best thing to do if re-staining it. After that, I'll cut the footboard in half and turn them 90°. That gives me the depth of the seat and the headboard gives me the width. I've got some old #2 red oak hardwood flooring left over from a job about a million years ago and I'll use that on the seat top. I won't paint that, but more than likely stain it, maybe ebony.
Paul Andersen (my wife's cousin actually), is a pretty serious bike rider. What happens when you are serious about something? Well, at some point you open you're own shop/store.
Ultimately, this was the road that Paul and his wife Trudee would take in their lives together. That is where I come in. They asked me to do the build for their shop/store. I said yes without hesitation, of course. The build will include a fitting room, customer service counter area, storage shelves, workbenches, and whatever else Paul can think of. I will be doing the whole build for them which includes framing, drywall, texture, paint, work benches, custom floating bike shelves, and odd/ends.
Mother's Day was awesome this year for my wife, Angela. Last year we put in a garden and she has wanted a potting bench. I've put it off, not on purpose but because we had other things that we were doing and trying to get done. However, this year she was out of town for Mother's Day and I thought, I should build that thing.
I quickly did a scan of materials I had on hand and made a short list of some things to get from Home Depot. I went to Home Depot and picked up the items I needed.Here is my materials list: 01: 4 - 4" by 4" Cedar Posts 02: 5 - 2" by 4" Cedar Boards 03: Old Fence Pickets (already had on hand) 04: One gallon of Hazelnut Paint 05: 2 and 1/2" bolts (already had on hand) 06: Metal decrative brackets (already had on hand)
Ok, my goal is to create a Zombie Kong, which basically is a King Kong Zombie type thing. It originally started out as the Pankot Palace Skull from "Indiana Jones and The Temple of Doom" but as you will see, it isn't even close.
Several people who have seen this thing have asked why I chose an ape, lol. So, after reconsidering my options with this thing, trash it or keep it, I thought I'd keep it and rebrand it and call it a success.
01. 2x2 Regular Construction Grade Material
02. A thin padding for bulk where I need it
03. Chicken Wire (1"x2'x25')
04. 1" Screws
05. 1/2" Staples
06. 5 Gallons of Drywall Mud
SSL Secure, All Payments Processed Via PayPal ✯ John R. Sherwood™ ® ✯ © Copyright 1998 ~ 2018