Not long ago me and the wife topped off the garden area with some bird houses. She likes having the birds around and hopefully with any luck we will get some birds. So, I made three bird houses and mounted them on top of 4"x4" posts. Our garden area is basically hazelnut (off-white), so everything was pre-painted by us before doing this. The houses were easy to build. They just have a 1"x2" frame... Read More

Time to add the finish layer to the bench seat. Normally, I would do this after painting but since this bench has ornate curves, that is difficult to do. Each board has been cut to fit. Otherwise, I would paint then stain the seat are and attach it after the fact. I had some #2 red oak left over from a job from years ago. I always thought oak flooring on a bench or chair would be nice. Well, here... Read More

Next, I'll build the framework for the seat. I'm using 1"x4" pine (It's what I had laying around), although this is what I'd use anyway. Since the front of the bench legs are pointing out slightly, I'll get my width measurement from the back where the legs are attached to the headboard. I can't remember off hand what my measurement was but I'll cut two boards at this length. After stapling the fi... Read More

My mom, Evelyn, lives in Colorado Springs and at the turn of the year, they had 75mph winds that caused all kinds of trouble for fence owners and anybody with a roof. I was unaware of what was happening because I live 2 hours north but she called me and said, "I need help". I asked what was going on and she said her fence blew over. She then told me about the winds and all the details. She asked ... Read More

One of the cool parts of this project so far, is the teeth. After thinking about how to do this, I decided to 1"x2"'s and 2"x4"'s cut at different angles for the base size and bulk. After that, I took some other chunks of the same material, got a screwdriver, hammer and chipped away making slivers and chunks. I then took those and stapled them to the bulk tooth in random patterns. This created a ... Read More

So, I had great luck with my other bone (for my 1st one). I thought I'd make another one. I decided to change the theme of it. Last time it was more or less a "been the woods, decomposing for awhile" bone. This time I thought I'd a "just been removed bone". Something that still has tendons/muscle attached. My supply list has changed as my process has changed. When I was doing the last one, I was ... Read More

Hello, this is my Human Bone Tutorial. Before I begin, I watched a few different tutorials online to get a basic idea of how to do this. I only needed a basic idea because this kind of thing is really driven by imagination. ... Read More

The very last part of the Long Mont Velo Build was to build some bike shelves for Paul. He wanted a couple of shelves to display some of his bikes. Instead of building something typical, I thought I'd try something a little different and if it didn't work our, I could always fall back on typical shelves. First, I had to glue some 2"x12" pine boards together with dowel rods. A few days later they ... Read More

Now is the fun part, although it's all fun. It's time for the build, Now that everything is stripped and sanded, I can cut the headboard in half and turn the pieces 90° to create our bench. Since the legs are curved I have to pay attention to where half way is. With square legs it's easy, but since these are curved it's a little different. So, using a couple of squares I'll be able to find the ce... Read More

Part 02 is the removing the finish and sanding it down. As you noticed I've removed the inserts. I will sand them down separately but I will re-install them afterward. What I've liked so far about this thing is that it had the original screws holding them inserts in. I like that and I always (if possible) try to use and keep the original hardware on things. It has character and I think that every... Read More

I picked up an antique 1940's (according to the lady) bed frame. I saw it on-line advertised in an estate sale. What I liked is that it was cheap, I think I paid about $75 for it and great lines. The height was also an eye grabber for me. After seeing it in person I immediately thought about making it into a bench as I had never done a bed frame to bench conversion. The only issue with this is tha... Read More

Yesterday was the most exhausting day I have ever had I think. I installed 1000sq' of laminate hard wood floor. I didn't plan on doing the floors as Paul was going to stain the floor. He decided to only stain the back work/storage area and then install hardwood flooring over the rest. I like doing hardwood floor, although I'm not excited about laminate flooring as I am a real hardwood floor guy. H... Read More

Today was a break from the normal as far as a build goes. Being is how this is a bike shop, Paul needed two work benches built for working/repairing bikes. He asked me if I could build these for him and I said you bet. I started by dado cutting four 4"x4" posts that were 32" high. In these dado cuts I installed the 2"x4"s I had cut. Once installed, this gives a nice solid feel, takes out any wobb... Read More

All Articles

Articles/Blog Categories
Articles/Blog Archive
Store/Shop Categories
Sign Up For Our Newsletter

Subscribe Unsubscribe
Drop Us A Line



Shopping Cart
Your shopping cart is empty.